Printer drivers color management

From ColorWiki

Revision as of 22:31, 8 September 2011 by Patrick (Talk | contribs)
Jump to: navigation, search

When printing target images used for profiling printers, it is important that no color management (no use of profiles) is occurring in the printing workflow. Making an accurate printer profile will require a target that represents the raw color output of the printer without anything else making color decisions. To this end, any program or application that is being used to print must have any use of profiles disabled, and in addition, the printer driver must also have its color management option disabled.

Here are some steps for ensuring that color management is turned off in the printer driver. These instructions are applicable to the making of RGB printer targets. (CMYK profiling targets are handled in a different way.)




The printer driver dialog shows up when a program is told to send an image to the printer.

Windows

Example of a Windows printer driver

<---- A typical Windows driver looks like this.

  • - The color section is usually found in Preferences or Advanced. In this example, choose the "Preferences" button


Select "Custom", and OFF
  • <-- Under Mode, change from Automatic to Custom
  • - Change Color Controls to Off (No Color Adjustment)


Mac

Typical Mac printer driver setup

<---- A Mac driver will look like this.

  • - Under Print Settings, click on the Basic tab
  • - For Color Mode choose "Off (No Color Management)



While you're at it, see our section on the Yellow Square test to make sure color management is turned off in the print.

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox